RTHDCPL.EXE - Illegal System DLL relocation.

Vulnerabilities in GDI Could Allow Remote Code Execution (925902)
http://www.microsoft.com/technet/security/bulletin/ms07-017.mspx

http://support.microsoft.com/kb/925902
Known issues
After you install this security update on a Windows XP Service Pack 2
(SP2)-based computer, Realtek HD Audio Control Panel (Rthdcpl.exe) may not
start. Additionally, you receive an error message that is similar to the
following:
Rthdcpl.exe - Illegal System DLL Relocation
The system DLL user32.dll was relocated in memory. The application will not
run properly. The relocation occurred because the DLL
C:\Windows\System32\Hhctrl.ocx occupied an address range reserved for Windows
system DLLs. The vendor supplying the DLL should be contacted for a new DLL.

Update for Windows XP (KB935448)
Install this update to resolve an issue where the Realtek HD Audio Control
Panel may not start after you install security update KB925902 (MS07-017) and
security update KB928843 (MS07-008).
http://www.microsoft.com/downloads/details.aspx?familyid=74AD4188-3131...9C-8FCB
Supported Operating Systems: Windows XP Service Pack 2


"Frank Martin" wrote:

> I get this error all of a sudden.
>
> "The system DLL user32.dll was relocated in
> memory. The application will not run
> properly. The relocation occured because the
> DLL C:\WINDOWS\syste32\HHCTRL.OCX occupied an
> address range reserved for Windows system
> DLLs. The vendor supplying the DLL contacted
> for a new DLL."
>
>
> How do I fix this? And which "vendor" do
> they mean?
>
> Please help, Frank
>
>
>
 >> Stay informed about: RTHDCPL.EXE - Illegal System DLL relocation. 

Thankyou for that notice for the link for the fix, TaurArian. I sent
Microsoft a email thru their customer support, asking for a fix for this
problem as stated thru other newgroups posts. But it says a reply could take
up 48 hrs. I guess a lot of people are having similar problems and they
decided to put the fix up instead of getting a lot of emails or phone calls
asking for a fix for this problem after todays newest update.
--
Robyn


"TaurArian" wrote:

> Vulnerabilities in GDI Could Allow Remote Code Execution (925902)
> http://www.microsoft.com/technet/security/bulletin/ms07-017.mspx
>
> http://support.microsoft.com/kb/925902
> Known issues
> After you install this security update on a Windows XP Service Pack 2
> (SP2)-based computer, Realtek HD Audio Control Panel (Rthdcpl.exe) may not
> start. Additionally, you receive an error message that is similar to the
> following:
> Rthdcpl.exe - Illegal System DLL Relocation
> The system DLL user32.dll was relocated in memory. The application will not
> run properly. The relocation occurred because the DLL
> C:\Windows\System32\Hhctrl.ocx occupied an address range reserved for Windows
> system DLLs. The vendor supplying the DLL should be contacted for a new DLL.
>
> Update for Windows XP (KB935448)
> Install this update to resolve an issue where the Realtek HD Audio Control
> Panel may not start after you install security update KB925902 (MS07-017) and
> security update KB928843 (MS07-008).
> http://www.microsoft.com/downloads/details.aspx?familyid=74AD4188-3131...9C-8FCB
> Supported Operating Systems: Windows XP Service Pack 2
>
>
> "Frank Martin" wrote:
>
> > I get this error all of a sudden.
> >
> > "The system DLL user32.dll was relocated in
> > memory. The application will not run
> > properly. The relocation occured because the
> > DLL C:\WINDOWS\syste32\HHCTRL.OCX occupied an
> > address range reserved for Windows system
> > DLLs. The vendor supplying the DLL contacted
> > for a new DLL."
> >
> >
> > How do I fix this? And which "vendor" do
> > they mean?
> >
> > Please help, Frank
> >
> >
> >
 >> Stay informed about: RTHDCPL.EXE - Illegal System DLL relocation. 

I forgot to mention the newest fix for my realtek driver is now working.
Thanks again!
--
Robyn


"Robyn" wrote:

> Thankyou for that notice for the link for the fix, TaurArian. I sent
> Microsoft a email thru their customer support, asking for a fix for this
> problem as stated thru other newgroups posts. But it says a reply could take
> up 48 hrs. I guess a lot of people are having similar problems and they
> decided to put the fix up instead of getting a lot of emails or phone calls
> asking for a fix for this problem after todays newest update.
> --
> Robyn
>
>
> "TaurArian" wrote:
>
> > Vulnerabilities in GDI Could Allow Remote Code Execution (925902)
> > http://www.microsoft.com/technet/security/bulletin/ms07-017.mspx
> >
> > http://support.microsoft.com/kb/925902
> > Known issues
> > After you install this security update on a Windows XP Service Pack 2
> > (SP2)-based computer, Realtek HD Audio Control Panel (Rthdcpl.exe) may not
> > start. Additionally, you receive an error message that is similar to the
> > following:
> > Rthdcpl.exe - Illegal System DLL Relocation
> > The system DLL user32.dll was relocated in memory. The application will not
> > run properly. The relocation occurred because the DLL
> > C:\Windows\System32\Hhctrl.ocx occupied an address range reserved for Windows
> > system DLLs. The vendor supplying the DLL should be contacted for a new DLL.
> >
> > Update for Windows XP (KB935448)
> > Install this update to resolve an issue where the Realtek HD Audio Control
> > Panel may not start after you install security update KB925902 (MS07-017) and
> > security update KB928843 (MS07-008).
> > http://www.microsoft.com/downloads/details.aspx?familyid=74AD4188-3131...9C-8FCB
> > Supported Operating Systems: Windows XP Service Pack 2
> >
> >
> > "Frank Martin" wrote:
> >
> > > I get this error all of a sudden.
> > >
> > > "The system DLL user32.dll was relocated in
> > > memory. The application will not run
> > > properly. The relocation occured because the
> > > DLL C:\WINDOWS\syste32\HHCTRL.OCX occupied an
> > > address range reserved for Windows system
> > > DLLs. The vendor supplying the DLL contacted
> > > for a new DLL."
> > >
> > >
> > > How do I fix this? And which "vendor" do
> > > they mean?
> > >
> > > Please help, Frank
> > >
> > >
> > >
 >> Stay informed about: RTHDCPL.EXE - Illegal System DLL relocation. 

On 4 Apr, 04:08, "Frank Martin" wrote:
> Thank you. I downloaded this, the one you
> suggested, and restarted the computer, and
> the thing went away.>http://www.microsoft.com/downloads/details.aspx?familyid=74AD4188-313...
>
> Regards, Frank
>
> "TaurArian"
> wrote
> in messagenews:361071A1-62D1-40BB-8398-7D8604EFB85A@microsoft.com...
>
> > Vulnerabilities in GDI Could Allow Remote
> > Code Execution (925902)
> >http://www.microsoft.com/technet/security/bulletin/ms07-017.mspx
>
> >http://support.microsoft.com/kb/925902
> > Known issues
> > After you install this security update on a
> > Windows XP Service Pack 2
> > (SP2)-based computer, Realtek HD Audio
> > Control Panel (Rthdcpl.exe) may not
> > start. Additionally, you receive an error
> > message that is similar to the
> > following:
> >Rthdcpl.exe- Illegal System DLL Relocation
> > The system DLL user32.dll was relocated in
> > memory. The application will not
> > run properly. The relocation occurred
> > because the DLL
> > C:\Windows\System32\Hhctrl.ocx occupied an
> > address range reserved for Windows
> > system DLLs. The vendor supplying the DLL
> > should be contacted for a new DLL.
>
> > Update for Windows XP (KB935448)
> > Install this update to resolve an issue
> > where the Realtek HD Audio Control
> > Panel may not start after you install
> > security update KB925902 (MS07-017) and
> > security update KB928843 (MS07-008).
> >http://www.microsoft.com/downloads/details.aspx?familyid=74AD4188-313...
> > Supported Operating Systems: Windows XP
> > Service Pack 2
>
> > "Frank Martin" wrote:
>
> >> I get this error all of a sudden.
>
> >> "The system DLL user32.dll was relocated
> >> in
> >> memory. The application will not run
> >> properly. The relocation occured because
> >> the
> >> DLL C:\WINDOWS\syste32\HHCTRL.OCX occupied
> >> an
> >> address range reserved for Windows system
> >> DLLs. The vendor supplying the DLL
> >> contacted
> >> for a new DLL."
>
> >> How do I fix this? And which "vendor" do
> >> they mean?
>
> >> Please help, Frank

Thanks for the link. One note of warning - when I first ran the
GenuineCheck.exe file, that is part of the download process, I was
told that it was out of date. I ran it again and second time around it
worked fine. I can at last look up my google emails - phew.
Thanks again for the link.

Guy
 >> Stay informed about: RTHDCPL.EXE - Illegal System DLL relocation. 

Thank you. I downloaded this, the one you
suggested, and restarted the computer, and
the thing went away.
> http://www.microsoft.com/downloads/details.aspx?familyid=74AD4188-3131...9C-8FCB
Regards, Frank




"TaurArian"
wrote
in message

> Vulnerabilities in GDI Could Allow Remote
> Code Execution (925902)
> http://www.microsoft.com/technet/security/bulletin/ms07-017.mspx
>
> http://support.microsoft.com/kb/925902
> Known issues
> After you install this security update on a
> Windows XP Service Pack 2
> (SP2)-based computer, Realtek HD Audio
> Control Panel (Rthdcpl.exe) may not
> start. Additionally, you receive an error
> message that is similar to the
> following:
> Rthdcpl.exe - Illegal System DLL Relocation
> The system DLL user32.dll was relocated in
> memory. The application will not
> run properly. The relocation occurred
> because the DLL
> C:\Windows\System32\Hhctrl.ocx occupied an
> address range reserved for Windows
> system DLLs. The vendor supplying the DLL
> should be contacted for a new DLL.
>
> Update for Windows XP (KB935448)
> Install this update to resolve an issue
> where the Realtek HD Audio Control
> Panel may not start after you install
> security update KB925902 (MS07-017) and
> security update KB928843 (MS07-008).
> http://www.microsoft.com/downloads/details.aspx?familyid=74AD4188-3131...9C-8FCB
> Supported Operating Systems: Windows XP
> Service Pack 2
>
>
> "Frank Martin" wrote:
>
>> I get this error all of a sudden.
>>
>> "The system DLL user32.dll was relocated
>> in
>> memory. The application will not run
>> properly. The relocation occured because
>> the
>> DLL C:\WINDOWS\syste32\HHCTRL.OCX occupied
>> an
>> address range reserved for Windows system
>> DLLs. The vendor supplying the DLL
>> contacted
>> for a new DLL."
>>
>>
>> How do I fix this? And which "vendor" do
>> they mean?
>>
>> Please help, Frank
>>
>>
>>
 >> Stay informed about: RTHDCPL.EXE - Illegal System DLL relocation. 

Frank Martin wrote:
> I get this error all of a sudden.
>
> "The system DLL user32.dll was relocated in
> memory. The application will not run
> properly. The relocation occured because the
> DLL C:\WINDOWS\syste32\HHCTRL.OCX occupied an
> address range reserved for Windows system
> DLLs. The vendor supplying the DLL contacted
> for a new DLL."
>
>
> How do I fix this? And which "vendor" do
> they mean?
>
> Please help, Frank
 >> Stay informed about: RTHDCPL.EXE - Illegal System DLL relocation. 

Hi, I'm new on the forum, but I immediately found the answer to this
error right here, and now I'll be back frequently! GOOD SHOW!


--
MoonFlag
 >> Stay informed about: RTHDCPL.EXE - Illegal System DLL relocation. 

Thanks for the help y'all!


--
corpsegrindr
 >> Stay informed about: RTHDCPL.EXE - Illegal System DLL relocation. 

I have recently started getting the exact same message. I noticed it
after I had done some defragmentation using System Mechanic 6.

I would also love to know how to resolve this issue and will post here
if i get nay results.

Jae


--
jaenicoll
 >> Stay informed about: RTHDCPL.EXE - Illegal System DLL relocation. 

Ignore that last post. I just scrolled down and saw the repsonses, ran
the update and restarted and all is well in the land of laptopdoom.

Fantastic site and already bookmarked. Thanks a bunch

Jae:smile:


--
jaenicoll
 >> Stay informed about: RTHDCPL.EXE - Illegal System DLL relocation. 

thanx ....


--
dosa
 >> Stay informed about: RTHDCPL.EXE - Illegal System DLL relocation. 

Sounds like the problem that shows up after installing the MS patch to fix
that recent Animated Cursor thing. Go here for the patch that fixes the
patch!

http://www.microsoft.com/downloads/details.aspx?familyid=74AD4188-3131...9C-8FCB






"jaenicoll" wrote in message

>
> I have recently started getting the exact same message. I noticed it
> after I had done some defragmentation using System Mechanic 6.
>
> I would also love to know how to resolve this issue and will post here
> if i get nay results.
>
> Jae
>
>
> --
> jaenicoll
 >> Stay informed about: RTHDCPL.EXE - Illegal System DLL relocation. 

My computer also says the Illegal System DLL relocation and it is not
allowing me to access the internet so I can not download anything and I
am using my home computer instead of my tablet labtop. Does anyone know
how i can fix this?


--
connerfb
 >> Stay informed about: RTHDCPL.EXE - Illegal System DLL relocation.